start
This is an old revision of the document!
Table of Contents
Xino Scanner S700
Welcome to the wiki of the Xino S700 scanner.
pressure bearing bush
description
The form of the pressure bearing bush has changed.
data:
| article number | 351.073674.000 0 | old: | - | |||||
|---|---|---|---|---|---|---|---|---|
| name | pressure bearing bush | |||||||
| order number | 351.073677.010 6 | number in set: | 10 | |||||
| service manual | page 9-28 chapter 9.2.7 Pressure bearing | |||||||
| function | without change | |||||||
| improvements | - Erhöhte Stabilität | |||||||
| - Buchsen lassen sich leichter in die Kugelkäfige einsetzen | ||||||||
| - Besserer Halt in den Kugelkäfigen | ||||||||
| maintenance | quarterly: | X | half-yearly: | yearly: | as needed: | |||
| maintenance activities | - Buchse aus Kugelkäfig drücken | |||||||
| - Kugellager aus Buchse drücken | ||||||||
| - Kugellager und Buchse reinigen | ||||||||
| - Auf Beschädigungen prüfen | ||||||||
| installation instructions | - Buchse leicht schräg ansetzen und in den Kugelkäfig drücken | |||||||
| replacement/retrofitting | necessary: | recommend: | exchange: | X | as required: | |||
| from SN installed | 85 | |||||||
pictures:
left: old version
right: new version
start.1461156984.txt.gz · Last modified: 2019/05/27 11:21 (external edit)